Hydro Sqq Form | Warmup Pro

Room type:

Select the closest match to your room.

This pre-loads information such as Air Temperature and Floor Finish, which you can customise later if you wish.

Total Floor Area:

This measurement is the entire floor area, including any unheated area.

m²

Optional
Enter the area of the floor that you don’t want to heat (e.g. the area under kitchen islands or baths). Room width is estimated for you but you can enter an exact figure to improve the accuracy of the quote.

Unheated Floor Area:

This measurement is the unheated floor area only.

It typically consists of the areas beneath permanent fixtures, such as kitchen units, baths, toilets and stair footings.

m²

Room width: (Estimated)

This measurement is the width of the heated area within the room

It is measured perpendicular to the pipe direction.

Choose Thermostat:

Please select a thermostat model that you wish to control this room with

You can select a different colour in the Basket.

If you wish to control two seperate rooms using a single thermostat, you can remove the spare thermostat in the basket.

6iE Smart WiFi thermostat

Element WiFi Thermostat

Tempo Programmable Thermostat

I'd like Wireless controls

Floor construction:

Please choose the floor construction that matches your requirement.

If you are installing a system over an existing floor, please select Overlay.

Select System:

Please choose from the compatible Warmup Systems.

Ultra-12

18mm build height with built in insulation and heat spreading technology for our highest heat output from 12mm pipe. For use over existing screeds. more info

Forte

16mm pipe system for fixing to reinforcement grids within new load bearing screeds. more info

Metro

Strong clip rail system with 16mm pipe for use in new screeds. more info

Nexxa

Easy to install panel system with 16mm pipe for use in new screeds. more info

Contura

30mm build height with built in insulation for floating floors. Use with 16mm pipe over existing screeds. more info

Clypso

Low cost staple system with 16mm pipe for use in new screeds. more info

Tectora

Diffusion plate system for use between joists with 16mm pipe. No additional build height, floor deck can be installed directly over joists. more info

Econna-12

22mm floor deck with built in heat spreading for 12mm pipe. Acts as a stuctural floor over joists. more info

Nexxa-12

22mm build height with flexbile spacing for 12mm pipe to give variable heat output over existing screeds. more info

I’d like details of an installer near me

World's fastest water underfloor heating quote from the World's best selling brand